The Scanmudring Umbilical / Wire emergency ( WC54 and WC054 ) Cutter is special designed for offshore use.


The ScanCutter is remotely operated by a pneumatic control panel, preventing the need
of personnel to stay close to the cutting area.
This enables a safe cutting operation. Default cable length for the remote control panel is 8m, but can be extended if required.
The ScanCutter can be powered either by vessel provided air pressure (max 8 bar) or dedicated nitrogen bottle (5kg) included in the spread.

The ScanCutter spread is mobilized in a single aluminum box, for easy handling and transport!
The spread is a simple and reliable system that can cut steel armored umbilicals and wires up to 54 mm and ultimate tensile strength of 1770N/mm2

Areas of use are:
- Umbilicals
- Wires
- Hydraulic and air supply hoses



Test of our new Scancutter WCO54 ( Video )








Scancutter (PDF)






Model WC54
Designed to cut umbilical/wire up to 54mm diameter.

They are supplied with pumps, hoses & couplings.
The umbilical/wire is inserted by either pushing the umbilical/wire through the
opening or by withdrawing the anvil pin to place the rope inside
the anvil.
The pin is then returned to hold the rope in place.
The units spring returned

Model WC054
Designed to cut umbilical/wire up to 54mm diameter.
They are supplied with pumps, hoses & couplings.
Open sided to allow easy positioning of the cutter along
a umbilical/wire length - particularly useful when cutting in confined
spaces.
The units are spring returned